crawl space encapsulation

Crawl Space Encapsulation in Nashville TN

As a home owner, you may be concerned about the state of your crawl space. If you are, then you may have done your research and discovered that the state of the crawl space affects the state of your home in general. If your crawl space is infested with pests and mold, then the air in your home will be contaminated. This is because more than half the air you breathe in your home is circulated through the crawl space.

Crawl space encapsulation has emerged as the most effective way to maintain a healthy environment in your crawl space. However, it isn’t enough to encapsulate your crawl space. It is important to ensure that it is done right.

Crawl Space Encapsulation the Right Way

When the company you have selected to carry out the encapsulation arrives at your home, they will have their own step by step process that they follow to fix the problem. It is important to be aware of what to expect from a professional company beforehand. This is one of the best ways to ensure that your crawl space is encapsulated properly. It will help you avoid problems in the future.

Although the specific step by step processes followed by different contractors vary, the following is a general guideline of the steps that they take:

  1. Inspection

The first step in encapsulation is an inspection of the site. This helps the contractor determine whether the crawl space can be encapsulated in its current state. If there are problems such as improper grading, mold infestations or other damage, then these will have to be addressed first. If there are no problems, then the process of encapsulation can begin.

Inspections are important before encapsulation. They ensure that there are no problems that may cause further problems after encapsulation.

  1. Preparation of the area

The crawl space is then prepared before the encapsulation. This may include the laying of gravel, the installation of a drain or other such preparations. These preparations are vital for the success of the encapsulation in the long term.

  1. Laying of the vapor barrier

A vapor barrier is then installed in the crawl space. This is a plastic sheet that is installed on the floor and walls of the crawl space.

  1. Insulation

The joists and inner walls of the crawl space are also insulated. The materials used for insulation should be resistant to moisture. Insulation helps to seal air leaks and prevent loss of heat from the house into the crawl space.

  1. Installation of a dehumidifier

A dehumidifier is installed to control the humidity levels in the crawl space.

  1. Sealing

The crawl space is then sealed off. This prevents the movement of air in and out of the crawl space. It also prevents the penetration of moisture into the crawl space.

Contact us today for more information!